[. . . ] Make sure that the power cord never becomes wet or damp during operation. Arrange for defective power plugs and/or cables to be replaced as soon as possible by a qualified technician or by our Customer Service Department to avoid the risk of injury. [. . . ] Now insert the power plug into the power socket and press the ON/OFF switch e down until it snaps in. â· The operating light r indicates that the device is now heating up. The devices switches off automatically and the operating light r goes out as soon as the water is at a full boil. In order to keep the water warm after bringing it to a boil, set the temperature regulator y in the keep warm range. Temperature regulator in the keep warm range The left end of the keep warm range indicates the lower temperature. The right end of the keep warm range indicates the higher temperature. After reaching the desired temperature, the appliance switches off the heating process. Because the device is equipped with a heat maintenance function, the device automatically begins reheating as soon as the water temperature falls below the set temperature. Make sure that the appliance does not automatically switch on to the keep warm function. â· As soon as the kettle u is lifted from the base t, the ON/OFF switch e jumps out and the operating lights r switch off. â· In order to halt the heating process, push the ON/OFF switch e up again. Avoid setting the temperature regulator y in the transition range, as the water can start boiling on account of varying filling levels. An open housing can create the risk of a life-threatening electrical shock. This can create the risk of a life-threatening electrical shock if residual liquid comes into contact with powered components. [. . . ] Repairs made after the expiration of the warranty period are subject to payment. The warranty for this appliance is for 3 years from the date of purchase. [. . . ]